Honda HRN216 Series Manual page 198

HRN216
REMOVAL
1. Disconnect the spark plug cap
2. VKA/VLA types:
Remove the blades, blade holder, and belt guide, and
then remove the drive belt from the drive pulley
(P. 4-13).
VYA type:
Remove the drive belt from the drive pulley.
a. Remove the blades.
b. Remove the top cover
(P. 4-13).
c. Hold the flywheel nut with a 19 mm socket while
removing the Roto-Stop special blade holder bolt. If
the flywheel nut loosens, be sure to tighten to the
proper torque during reassembly
d. Remove the Roto-Stop brake assembly
VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
(P. 3-8).
(P. 4-13) and recoil starter
(P. 9-8).
(P. 4-6).
3/8-24 x 1 in
SPECIAL BOLT
54 N•m (40 ft-lb)
BELT
GUIDE
BLADE
HOLDER
BLADE
BOLTS/
WASHERS
UPPER/LOWER
BLADE
TOP COVER
RECOIL
FLYWHEEL NUT
BLADE HOLDER BOLT
54 N•m (40 ft-lb)
ROTO-STOP
BLADE
BRAKE
BOLTS/
ASSEMBLY
WASHERS
WOODRUFF
KEY
DRIVE
PULLEY
6 x 14 mm
FLANGE BOLT
DRIVE
BELT
DRIVE
PULLEY
DRIVE
BELT
12-13