Setting The Radio Channel - Sekonic SPECTROMASTER C-700 Series Operating Manual

5-5-2

Setting the Radio Channel

The radio channel can be set from the Tool Bo or from the channel indication in the
lower light corner of the Measurement screen.
or how to set the channel from the Tool Bo , refer to the Tool Bo item. ( P
Operation
1.
Touch the [Tool Box] icon.
Touch and select the [Digital ilm] button. ( P92)
on the Measurement Screen
2.
Select the type of camera (Digital or ilm) used.
Touch either the [Digital] or [Film] button.
OK Button
[Tool Box] Icon
Digital/Film Screen
5. Measuring Light Sources [Measurement Screen]
Tool Box Screen
The selected icon will be displayed
encircled in blue.
Cancel Button
0
)
The set
content is
displayed.