Table of Contents
Advertisement
3.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
The measurement results will be displayed.
Measurement Results Screen
for Multi Lights
ilter Name
ilter Name
Filter Brand
NOTE
● Measurements and display will take longer in light levels below 0l . The
LCD illumination will normally switch off during measurements to avoid
influence to measurements.
● When Memory button is pressed while in this Measurement Result Screen
in Multi Lights, the value can be stored in memory.
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
[Close] Button
2
4. Setting the Measuring Conditions
Light Selection Ring
(
)
(
)
Measuring Button
2
5
Advertisement
Table of Contents
