Table of Contents
Advertisement
5-6
Contrast unction (in Ambient ight Mode only)
In all item (e cept LB, CC filter name) modes, when you
touch the [Delta] icon (
to (
).
While this mode, the difference between standard value
and currently being measured value is displayed as long
as the Measuring Button
The reference value is the measurement value when the
[Delta] icon is pressed.
When the Measuring Button
value is displayed as the last measurement.
The graphs in Spectrum, CRI and White Balance
Correction modes show the standard value only
even if Contrast unction is activated.
Operation
1.
Press the Measuring Button
The measurement results will be displayed.
Measurement Screen
NOTE
Measurements and display will take longer in light levels below 0l . The LCD
illumination will normally switch off during measurements to avoid influence to
measurements.
), the [Delta] icon changes
is pressed.
5
is released, the standard
5
5
and start measurements.
86
5. Measuring Light Sources [Measurement Screen]
Measuring Button
5
Advertisement
Table of Contents
