Table of Contents
Advertisement
5.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
Measurements can now be made.
NOTE
Measurements and display will take longer in light levels below 0l . The LCD illumination
will normally switch off during measurements to avoid influence to measurements.
6.
Touch the [Magnifying Glass (+)] icon on the screen.
The spectrum distribution graph will be enlarged.
The enlarged graph is displayed on the whole screen (landscape).
To return to the Spectrum screen, touch the Magnifying
spectrum distribution graph.
Spectrum Screen
Measurement
results are
displayed.
NOTICE
When the enlarged graph is displayed, measurement cannot be performed.
NOTE
The ma imum display value of the -a is can be selected by the item Spectrum
-a is Scale icon in page 2 of Setting. ( P
7.
Memorize the measurement results.
Measurement results can be memorized.
To record measurements, press Memory Button
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
37
4. Setting the Measuring Conditions
Light Selection Ring
(
)
(
)
Measuring Button
lass (-) icon on the enlarged
Spectrum Distribution Graph
Enlarged Display
0)
. ( P 7)
7
2
5
Advertisement
Table of Contents
