Table of Contents
Advertisement
NOTE
Measurements and display will take longer in light levels below 30lx. The LCD illumination
will normally switch off during measurements to avoid influence to measurements.
Power OFF
1.
Press and hold the Power Button
The meter will turn OFF.
NOTICE
Please wait 3 seconds between repeated power on and power off sessions.
NOTE
● If the LCD screen shows no display, check if the batteries are installed properly (Pos/Neg
positioning) and have enough capacity.
● All settings and measurements made during use are saved in memory even after the
meter is powered off.
3
for 1 second or longer.
8
2. Before Use
Advertisement
Table of Contents
