9.
Touch the radio button of the light source to set as the standard.
( : Selected,
: Not selected)
Correction value of each other light sources (not selected as standard) are displayed
in any value you selected on the Display Item screen.
If LB/CC inde or LB/CC Light ilter is selected, the reference value area will display ----- .
Also if any selected indication values in other light sources displays ----- , it means there is little
value to correct.
Multi Lights Screen
NOTE
To clear all of the measurement results and start a measurement comparison again,
touch the [Clear] button.
The Multi Lights Clear Confirmation screen will be displayed.
Multi Lights Screen
[Clear]
Button
Touch the [Yes] button.
All (A
D) will be deleted, and it will return to the Multi Lights screen.
When the No button is touched, the display returns to the Multi Lights screen
without deleting the values.
4. Setting the Measuring Conditions
Standard Selection Radio Button
Selected Status
Corrected alue Display
Clear Confirmation Screen
[Yes] Button
[No] Button