Table of Contents
Advertisement
Operation
1.
Touch the [Display Mode] icon on the Measurement screen or
press Menu Button
The Display Mode Selection screen will be displayed. ( P29)
Display modes from No. to
Display mode No. is for settings.
2.
Touch a desired Display Icon.
The measurement screen in selected Display Mode appears on the screen.
Display Mode
Selection Screen
Touch the
[Text] icon
3.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
Measurements can now be made.
NOTE
● To measure the color temperature of a light source properly, point Light
Receptor
1
● Measurements and display will take longer in light levels below 0l . The
LCD illumination will normally switch off during measurements to avoid
influence to measurements.
6
on the meter.
are for measurement.
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
directly at light source during reading.
31
4. Setting the Measuring Conditions
Measurement Screen
Text Mode
Light Selection Ring
(
)
(
)
Measuring Button
2
Light
Receptor
1
5
Advertisement
Table of Contents
