7.
Touch the [Yes] button.
eturns to the Multi ights screen. (Measurement results are reflected in the light
source [A])
To return to the Multi Lights screen without reflecting the results, touch the No button.
Multi Lights Screen
8.
Measure other light sources for comparison.
Repeat steps
through 7 for display areas B, C and D. Up to
compared.
NOTE
● Touch the A, B, C or D button to confirm the measured values.
● Measurements and display will take longer in light levels below 0l . The
LCD illumination will normally switch off during measurements to avoid
influence to measurements.
● When Memory button is pressed while in this Measurement Result Screen
in Multi Lights, the value can be stored in memory.
4. Setting the Measuring Conditions
Measurement results are displayed.
light sources can be