Sekonic SPECTROMASTER C-700 Series Operating Manual page 189

Operation
1.
With the meter turned OFF, hold down the Menu Button
press the Power Button 3.
* Until the Hardware Setting screen is displayed, do not release the Menu Button
the Power Button
If you release the button before the Hardware Setting screen is displayed, the
Measurement screen will be displayed.
The Hardware Setting screen is displayed.
Menu Button
2.
Touch the desired menu item.
The setting screen of the selected item will be displayed.
Refer to the explanations on the following page for each item setting.
3.
hen finished, touch the [Close] button.
This will return the display to the Measuring screen.
.
3
6
175
8. Hardware Setting Screen
Power Button
3
6 and
and
6