Sekonic SPECTROMASTER C-700 Series Operating Manual page 41

3.
Touch the [OK] button.
Confirms input value and returns to previous measurement screen.
Touch Cancel to return to the previous measurement screen without setting Target
value.
The target color temperature in Text Mode is set.
NOTE
Setting Target for Digital Mode
● Set the meter to the same color temperature set on your camera. Please note that
many digital cameras reproduce color better at certain color temperature settings. If
your work re uires optimum color reproduction and high color fidelity, select the camera
manufacturers recommended color temperature for best color reproduction.
(Please refer to your digital camera's operating manual.)
● ou can set the color temperature from 2, 00K to 0,000K in steps of 0K.
● When you fre uently use multiple reference color temperatures, use preset for
convenience. ( P
Setting Target for Film Mode
● Set the reference color temperature of the type of film you are using.
Daylight type
Tungsten Type-A
Tungsten Type-B
● ou can set the color temperature from 2, 00K to 0,000K in steps of 0K.
)
, 00K
, 00K
,200K
27
4. Setting the Measuring Conditions