Table of Contents
Advertisement
4.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
Measurements can now be made.
NOTE
Measurements and display will take longer in light levels below 0l . The LCD
illumination will normally switch off during measurements to avoid influence to
measurements.
5.
The current measurement is displayed at the top of display area.
6.
Touch the [Memory Select] icon.
The [Spectrum Comp. Memory] screen will be displayed.
Spectrum Comp.
Current
Measurement
Memory
Selection] Icon
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
Screen
4. Setting the Measuring Conditions
Light Selection Ring
(
)
(
)
Measuring Button
Spectrum Comp.
Memory Screen
2
5
Memory
Selection
Area
Advertisement
Table of Contents
