Table of Contents
Advertisement
CA T O
●
Do not trigger flash while skin or other objects are in contact with the flash
tube. Do not touch the flash tube after continuous flashes. ( t may cause
burns.)
●
Do not trigger flash while near the eyes of people or animals. ( t may
temporarily affect vision.)
●
The flash may be triggered suddenly. Because there is the possibility of
burns or negative effects on vision, please handle with care.
NOTICE
● f the flash output power is too weak compared to the surrounding light, the meter
may not detect the flash output. n this case, use "5-4 Measurement in Cord (PC)
Flash Mode". ( P71)
● Pulsed light sources such as fluorescent lights or special lighting could cause the
meter to take cordless flash measurements in rare cases. n these situations, use
"5-4 Measurement in Cord (PC) lash Mode". ( P71)
● If the Light Receptor
meter may mistakenly take a measurement. To avoid this, take "5-4 Measurement
in Cord (PC) lash Mode". ( P71)
● Because the light radiated from a flash bulb gradually builds, the meter will not
detect the light when used in Radio Triggering Flash Mode.
Be sure to take "5-4 Measurement in Cord (PC) lash Mode". ( P71)
●
hen using lash Cordless Mode, the CD screen backlight dims during
measurement, and the CD backlight is illuminated for only 3 seconds after
measurement. To cancel standby mode, touch the screen or press the Memory
Button
.
7
detects a sudden, bright change in lighting intensity, the
1
85
5. Measuring Light Sources [Measurement Screen]
Advertisement
Table of Contents
