Table of Contents
Advertisement
4.
Touch the Filter [Brand] indication to open the Camera Filter
Brand selection screen. Then touch the indication for filter brand
you are using and [OK] button to return to the measuring screen.
iltration is available in KODAK WRATTEN 2, U I ILM or LEE.
Camera Filter Screen
Filter [Brand]
indication
5.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
Measurements can now be made.
NOTE
Measurements and display will take longer in light levels below 0l . The LCD
illumination will normally switch off during measurements to avoid influence to
measurements.
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
46
4. Setting the Measuring Conditions
Camera Filter Brand
Selection Screen
Light Selection Ring
(
)
(
)
Measuring Button
[OK] Button
2
5
Advertisement
Table of Contents
