Table of Contents
Advertisement
NOTICE
●
hen the ight Selection ing
calibration position, the message "Please set ight
Selection Ring for dark calibration." is displayed. Set the
ight Selection ing
(
) to calibrate the system.
● If dark calibration is not successful, "Dark calibration
failed. Please check ight Selection ing position." is
displayed. Set the ight Selection ing
calibration position
6.
Press the Measuring Button
Turn the Light Selection Ring
When measuring ambient light, make sure to select Range L
When measuring flash units, select Range L
depending on the brightness of of the flash. ( P88,
NOTICE
When the Measuring Button
position, the message "Measurement failed. Please check ight
Selection ing position." is displayed. Set the ight Selection ing
to the correct position and the Measurement screen will be
2
displayed.
is not set to the dark
2
to the dark calibration position
2
2
(
) to calibrate the system.
5
to measure.
to select the range.
2
is pressed at the dark calibration
5
7
Dark Calibration Position
Confirmation Screen
Confirmation Screen
to the dark
(
(
) or Range H
P90)
2. Before Use
Dark Calibration
).
(
)
Advertisement
Table of Contents
