Table of Contents
Advertisement
Status
Setting values and
measurement values of
the spectrometer are not
in the camera settings
The memory function
cannot be used
Flash cannot be triggered
in Radio Triggering Flash
Mode.
(C-700R only)
Check item
Do the shutter speed and iris
setting step of the camera and
the shutter speed and iris setting
step of the spectrometer match?
Is the differential measurement
icon displayed?
Is "Memory Full" displayed when
pressing the Memory Button?
Do you use a receiver that
installs the PocketWizard
system? Or do you use a radio
system of other brands or
manufacturers?
Do the radio destination of the
spectrometer that is a transmitter
and the receiver match?
Did you set the same channel
number to the transmitter and
the receiver? Are you mixing
the Standard system and the
®
ControlTL
system?
199
Some cameras can select 1/3
step, 1 step and 1/2 step, like a
spectrometer. Match the step of
the spectrometer with the step
of the camera. (Shutter Speed
Step) ( P127)
The memory function cannot
be used when the differential
measurement icon is displayed.
Cancel the differential
measurement mode.
The memory can store up to 99
values.
Clear unnecessary memory
values in advance, measure,
and memorize it.
Use a receiver that installs the
®
PocketWizard
www.pocketwizard.com
There are two types, FCC&IC
(344 MHz band) and CE
(433 MHz band). Check if the
destinations (frequency) of the
transmitter and the receiver are
the same.
Check if the transmitter and the
receiver use the same system,
either the Standard system or
the ControlTL
the same channel number.
11. Troubleshooting
Measure
®
system.
®
system, and set
Advertisement
Table of Contents
