Creating The Group Coverage Delay Interval - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN LEGEND System Programming
11. Enter the coverage group
number.
12. Return to the previous menu.

Creating the Group Coverage Delay Interval

Assign the number of rings (1–9) that occur before a call is sent to Group
Coverage receivers.
Use MERLIN LEGEND Form 6d to identify the Coverage Delay
Interval.
The factory setting for Coverage Delay is 3 rings.
If you change the Group Coverage Delay interval, it maybe necessary to
change the Transfer Return Time and VMS Transfer Return Intervals. For
details, refer to "Transfer Return Time" and "VMS Transfer Return Interval"
earlier in this chapter.
If any station has personal coverage and coverage by MERLIN MAIL — ML, the
Transfer Return and VMS Transfer Return Intervals must be greater than the
sum of the Coverage Delay and Delay Ring intervals.
Step Instruction
1. Enter programming mode.
2. Select Options.
3. Display next page of menu.
4. Select Group Coverage Delay
Interval.
[nn]
E n t e r
Exit
MLX-20L
[More]
Sys Program
Exit
Options
[More]
Cover Delay
Call Answer Service
[nn]
[F10]
[F5]
PC
[S][P][M]
[Enter]
[any key]
[F1]
[F5]
[F7]
[PgUp]
[F6]
4-9