Providing Group Coverage; Assigning Ca Ports To A Cdg - AT&T MERLIN MAIL Implementation Manual

Providing Group Coverage

ASSIGNING
CA PORTS
TO A CDG
Follow Form I: Call Answer Coverage Schemes to assign
this coverage for two-port configurations that need to
cover more than 12 stations or four-port configurations
that need to cover more than 24 stations.
When combining Group Coverage with Personal
NOTE:
Coverage, set the MERLIN MAIL system for
delayed answer (see "Setting Delayed Answer"
under "Personal Coverage").
Follow the procedure below to assign the CA ports to a
Call Distribution Group.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
From the Stations Menu, press [
4
Enter the CDG number, then press [
5
Press the Auto Intercom button of the CA ports.
6
Green light on = port assigned to CDG
Green light off = port not assigned to CDG
] twice.
More
Providing Call Answer Service
].
Stations
], [ ].
GrpCall
].
Enter
6-3