Accessing The Merlin Mail-Ml System - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN MAIL—ML System Programming
Accessing the MERLIN MAIL—ML System
You must first log into the MERLIN MAIL—ML system before you can perform
any MERLIN MAIL—ML system programming tasks.
To log into the MERLIN MAIL—ML system:
1. Enter MERMAIL (the MERLIN MAIL—ML Calling Group extension).
The MERLIN MAIL—ML greeting plays.
2. Enter the system administrator's EXTENSION followed by [#]
The Password prompt plays.
NOTE:
Until you change it, the system administrator's extension is
[ 9 ] [ 9 ] [ 9 ] [ 7 ]
Enter the system administrator's PASSWORD followed by [#]
3.
The system administrator's name plays; then the Voice Mail Activity Menu
plays.
NOTE:
Until you change it, the system administrator's password is
[1] [2] [3] [4] . To help maintain system security, it is strongly
recommended that after installation, you change the system
administrator's password. See "Changing the System Administrator's
Password" later in this chapter
3-8
Before Beginning MERLIN MAIL—ML Programming