Specifying Languages - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN MAIL—ML System Programming

Specifying Languages

Before you can create subscriber voice mailboxes, you must specify whether
the MERLIN MAIL—ML system is to operate in monolingual or bilingual mode.
Once the mode has been selected, the system language(s) must be specified
as well.
NOTE:
The MERLIN MAIL—ML system retains recordings initially set up for
bilingual operation if you later decide to change to monolingual
operation. This allows recovery of prompts, menus, and announcements
for both languages if you choose to return to bilingual operation.
The factory setting is monolingual mode with English as the
system language.
MERLIN MAIL—ML Form A: System Parameters identifies the
language mode and language(s) supported.
To specify the language, follow the instructions below:
1. Log in to the MERLIN MAIL—ML system as the system administrator.
The system administrator's name plays; then the Voice Mail Activity Menu
plays.
2. [9] to program the MERLIN MAIL—ML system.
The System Administration Menu plays.
3. [1] for System Parameters.
The System Parameters Menu plays.
4. [9] to program the system language.
The system tells you the current mode, then prompts you to select
monolingual or bilingual mode.
Programming MERLIN MAIL—ML System Parameters
3-17