Assigning The System Administrator Mailbox - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN MAIL—ML System Programming

Assigning the System Administrator Mailbox

CAUTION
To prevent unauthorized programming of the MERLIN MAIL—ML
system, the
changed.
MERLIN
planned
The factory setting for the system administrator's mailbox is 9997,
with password 1234.
MERLIN MAIL—ML Form B: Voice Mailbox Assignments identifies
all planned voice mailboxes in the system.
To change the factory setting for the system administrator's
mailbox, you must create a new mailbox before you change the
assignment (see "Creating Mailboxes" earlier in this chapter).
If your system is set up for bilingual mode, change the mailbox
language for the system administrator's mailbox if it is not
correct. After you change it, disconnect and log in again to hear
the prompts in the newly chosen language.
If the system administrator changes the password and forgets it,
or a new system administrator does not know the password set
by his or her predecessor, your AT&T representative or
authorized dealer can reset the password after obtaining proper
authorization from the customer.
To assign the system administrator mailbox, follow the instructions below:
1. Log in to the MERLIN MAIL—ML system as the system administrator.
The system administrator's name plays; then the Voice Mail Activity Menu
plays.
2. [9] to program the system.
The System Administration Menu plays.
3-30
Changing Factory-Set Mailboxes
system administrator's mailbox and password should be
MAIL—ML Form A: System Parameters identifies the
system administrator extension.