Programming Voice Mailboxes - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN MAIL—ML System Programming

Programming Voice Mailboxes

The system administrator can program voice mailboxes for any extension on
the MERLIN LEGEND system. The following options are available when
creating voice mailboxes:
Message storage limit—0, 5, 10, or 60 minutes
Transfer Type—how the MERLIN MAIL—ML system processes a
call transfer to the mailbox.
Outcalling—whether or not the MERLIN MAIL—ML system is
permitted to call a subscriber-designated telephone number and
inform the subscriber that new messages have been received.
These voice mailbox options are designated by the Class of Service (COS).
The Class of Service (COS) key (shown in "Creating Mailboxes ", the next
topic) lists all 16 available option combinations.
If you have setup the MERLIN MAIL—ML system for bilingual operation, you
also specify whether system prompts for the subscriber are played using the
primary or secondary system language. Callers can switch to the alternate
language by pressing [*] [1]
Voice mailboxes must be created before programming the remaining MERLIN
MAIL—ML features. See Figure 3-4 for an overview of the MERLIN MAIL—ML
menus used to program mailboxes. (To modify or delete Mailboxes, refer to
the MERLIN MAIL—ML System Administration guide. )
Programming Voice Mailboxes 3-19