Transfer Return Interval - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN LEGEND System Programming
Step Instruction
1 . Enter programming mode.
2. Select Extensions.
3. Display next page of menu.
4. Select Group Calling.
5. Select Hunt Type.
6. Enter extension number of
the MERLIN MAIL — ML
Calling Group.
7. Specify linear hunt type.
8. To return to previous menu
Transfer Return Time
The Transfer Return Time is the number of rings that occur before a
transferred call returns to the extension from which it was transferred.
If all stations are covered only by the MERLIN MAIL—ML system, the Transfer
Return Time should be set to a value greater than the Coverage Delay. If any
station has personal coverage and group coverage by the MERLIN MAIL—ML
system, set the Transfer Return Time to a value greater than the sum of the
Coverage Delay and Delay Ring intervals.
Use MERLIN LEGEND Form 6f to identify the Transfer Return
Interval.
The factory setting is 4 rings.
4-4
Group-Assigned Features
MLX-20L
[Menu]
Sys Program
Exit
Extensions
[More]
Grp Calling
Hunt Type
[nnn]
Enter
Linear
Enter
Exit
PC
[S][P][M]
[Enter]
[any key]
[F1]
[F5]
[F6]
[PgUp]
[F4]
[F1]
[nnn]
[F10]
[F2]
[F10]
[F5]