Merlin Legend System Programming - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN LEGEND
System Programming
This chapter provides instructions for programming the MERLIN LEGEND
system settings. You can program the MERLIN LEGEND system settings from
a MERLIN LEGEND MLX-20L™ Programming Console or you can use System
Programming Maintenance (SPM) software on a personal computer. For
further details on MERLIN LEGEND programming, refer to the MERLIN
LEGEND System Programming Guide.
The charts in the following descriptions show the task to be performed in the
left-most column and the buttons to press or menu items to select in the
remaining two columns. If you are using the console, follow the instructions in
the MLX-20L column; if you are using SPM, follow the instructions in the PC
column. An instruction such as [S][P][M] means to press the "S" key, then the
"P" key, and then the "M" key. An instruction such as [Alt] + [P] means to press
the "ALT" key, and while holding it down, press the "P" key.
NOTE:
If you have SPM Release 2.09 or a later release, you can use [Enter] or
[F10] whenever [F10] is noted in Chapters 4 and 5. In addition, you can
use the arrow keys to highlight items on menus and the [Backspace] key or
[F4] to erase characters. See the MERLIN LEGEND System Programming
Guide for additional information on SPM.
4
4-1