Changing The System Administrator's Password - AT&T MERLIN MAIL System Programming And Maintenance Manual

MERLIN MAIL—ML System Programming
3. [1] for System Parameters.
The System Parameters Menu plays.
4. [7] to change the system administrator's voice mailbox.
The current system administrator's voice mailbox number plays, followed by
a prompt to enter the system administrator's extension number.
5. Enter the new system administrator's extension number followed by [#]
The new voice mailbox number plays, followed by the System Parameters
Menu.
Changing the System
Administrator's Password
It is recommended that you change the system administrator's password after
the MERLIN MAIL—ML system installation is complete.
To change the system administrator's password, follow the instructions below:
1. Log in to the MERLIN MAIL—ML system as the system administrator.
The system administrator's name plays; then the Voice Mail Activity Menu
plays.
2. [5] to program your new password.
The prompt asks you to enter your new password.
3. Enter the new password (up to four digits) followed by [#]
The prompt asks you to re-enter your new password.
4. Enter the new password followed by [#]
The system plays a message confirming that the password has been
changed.
Changing Factory-Set Mailboxes 3-31