Removing The Hard Disk - Juniper JA2500 Junos Space Hardware Manual

JA2500 Junos Space Appliance Hardware Guide

Removing the Hard Disk

136
An antistatic bag or an antistatic mat
Removing the Hard Disk on page 136
Installing the Hard Disk on page 137
To remove a hard disk from the JA2500 appliance, do the following:
Place the antistatic bag or antistatic mat on a flat, stable surface.
1.
(Optional) Attach an ESD grounding strap to your bare wrist, and connect the strap
2.
to an external ESD point.
Turn the hard disk locking screw counterclockwise to the unlock position, as shown
3.
in Figure 23 on page 136, to unlock the hard disk lever.
Push the screw knob (button) in so that the hard disk lever is released.
4.
Gently pull the hard disk lever outwards, and slide the hard disk out of the slot. Keep
5.
one hand underneath the hard disk to support it while removing it from the chassis.
Place the hard drive in the antistatic bag or on the antistatic mat placed on a flat,
6.
stable surface.
Figure 23: Removing a Hard Disk
Copyright © 2018, Juniper Networks, Inc.