Node - Juniper JA2500 Junos Space Hardware Manual

JA2500 Junos Space Appliance Hardware Guide
Related
Documentation
Configuring a Junos Space Appliance as a Standalone or Primary FMPM Node
70
To troubleshoot issues in configuring the eth1 interface, refer to the
file.
/var/log/changeEth1.log
Junos Space Ethernet Interfaces Overview on page 7
Changing Network and System Settings for a Junos Space Appliance on page 87
Configuring a Junos Space Appliance as a Standalone or Primary FMPM Node on
page 70
Installing a Junos Space Image on a Junos Space Appliance by Using a USB Drive on
page 96
You can configure a Junos Space Appliance as a Junos Space node or as a specialized
network monitoring node used for fault monitoring and performance monitoring (FMPM).
An FMPM node can be configured as a standalone or primary FMPM node, or as a
secondary or backup FMPM node. The first FMPM node that you configure is always the
standalone or primary node; this node performs fault and performance monitoring of
the devices and nodes, and any events or alarms are stored in a PostgreSQL database
on this node. This topic explains how you can configure an appliance as a primary FMPM

node.

NOTE: You must have at least one appliance already configured as a Junos
Space node to configure a different appliance as an FMPM node.
To configure a Junos Space Appliance as a standalone or primary FMPM node, you must
configure basic network and system settings to make the appliance accessible on the
network.
NOTE:
From Junos Space Network Management Platform Release 14.1R2 onward,
you can configure Junos Space Ethernet interfaces with only IPv4 addresses,
or both IPv4 and IPv6 addresses.
From Junos Space Network Management Platform Release 16.1R1 onward,
you can configure access to Junos Space through a Network Address
Translation (NAT) gateway.
Before you begin, do the following:
Ensure that the Junos Space Appliance is connected to a management console and
that the management device is powered on.
Ensure that the appliance is booted and displays the login prompt at the console.
Copyright © 2018, Juniper Networks, Inc.