Tools And Parts Required To Install The Junos Space Appliance - Juniper JA2500 Junos Space Hardware Manual

JA2500 Junos Space Appliance Hardware Guide
Related
Documentation

Tools and Parts Required to Install the Junos Space Appliance

Related
Documentation
28
Table 16: Rack Requirements for the Junos Space Appliance (continued)
Rack
Requirement Specifications
Spacing of The holes within each rack set are spaced at 2-U [3.5 in (8.9 cm)]. Therefore,
mounting the appliance can be mounted in a rack that provides holes or hole patterns
bracket and spaced at 2-U [3.5 in (8.9 cm)] increments, or in a rack that provides holes
flange holes or hole patterns spaced at 1-U [1.75 in. (4.5 cm)] increments as long as there
is 2x1-U space available in the rack.
The mounting brackets and front-mount flanges used to attach the chassis
to a rack are designed to fasten to holes spaced at rack distances of 2-U
[3.5 in (8.9 cm)] increments, or in a rack that provides holes or hole patterns
spaced at 1-U [1.75 in. (4.5 cm)] increments as long as there is 2x1-U space
available in the rack.
The mounting holes in the mounting brackets provided with the device are
spaced 1.25 in. (3.2 cm) apart (top and bottom mounting holes).
Connecting to Always secure the rack in which you are installing the appliance to the structure
the building of the building. If your geographical area is subject to earthquakes, bolt the
structure rack to the floor. For maximum stability, also secure the rack to ceiling brackets.
Mounting the JA2500 Junos Space Appliance on page 34
Rack-Mounting Warnings on page 163
Tools and Parts Required to Install the Junos Space Appliance on page 28
Table 17 on page 28 lists the tools and equipment required for installing and maintaining
the Junos Space Appliance.
Table 17: Required Tools and Parts for Installing the Junos Space Appliance
Task
Installing the appliance
Connecting the appliance
Packing the appliance
Junos Space Appliance Rack Requirements on page 27
Tools and Parts
Phillips (+) screwdriver, number 2
Phillips (+) screwdriver, number 3
(Optional) Tie wrap
(Optional) ESD grounding wrist strap
Phillips (+) screwdriver, number 1 for connecting the
power supply wires and the grounding wire for the
DC power supply module.
Electrostatic bag or antistatic mat, for each
component
(Optional) ESD grounding wrist strap
Copyright © 2018, Juniper Networks, Inc.