Figure 306 Application Edit; Table 114 Application Edit; Application Patrol Edit - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

27.9.1 Application Patrol Edit

Use this screen to edit the settings for an application. To access this screen, go to the
application patrol Common, Instant Messenger, Peer to Peer, VoIP, or Streaming screen
and click an application's Edit icon. The screen displayed here is for the MSN instant
messenger service.

Figure 306 Application Edit

The following table describes the labels in this screen.

Table 114 Application Edit

LABEL
Service
Enable
Service
Service
Identification
Name
Classification
Service Port
Add icon
Policy
ZyWALL USG 300 User's Guide
DESCRIPTION
Select this check box to turn on patrol for this application.
This field displays the name of the application.
Specify how the ZyWALL should identify this application. Choices are:
Auto - the ZyWALL identifies this application by matching the IP payload with the
application's pattern(s).
Service Ports - the ZyWALL identifies this application by looking at the destination
port in the IP header.
This is available if the Classification is Service Ports. You can view and edit the
ports used to identify this application.
When the Classification is Service Ports, this column provides icons to add and
remove port numbers used to identify the application.
Click Add add a port number. Type the destination port number in the Service Port
field.
Click Remove to delete a port number. The web configurator confirms that you
want to delete the port number before doing so.
This table lists the policies configured for this application.
Chapter 27 Application Patrol
391