Figure 158 Network > Routing > Ospf; Table 73 Network > Routing Protocol > Ospf; Ospf Screens; Ospf Summary - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

2 Set up the OSPF areas.
3 Configure the appropriate interfaces. See
4 Set up virtual links, as needed.

13.4 OSPF Screens

The OSPF screens are used to specify the ID the ZyWALL uses in the OSPF AS and to
maintain the policies for redistribution. In addition, they are also used to create, maintain, and
remove OSPF areas.

13.4.1 OSPF Summary

The OSPF screen is used to specify the OSPF router and maintain the policies for
redistribution. In addition, it provides a summary of OSPF areas, allows you to remove them,
and opens the OSPF Add/Edit screen to add or edit them.
To access this screen, login to the web configurator. When the main screen appears, click once
on Network > Routing >OSPF to open the following screen.
Figure 158 Network > Routing > OSPF
The following table describes the labels in this screen. See
more information as well.
Table 73 Network > Routing Protocol > OSPF
LABEL
OSPF Router ID
Redistribute
ZyWALL USG 300 User's Guide
DESCRIPTION
Select the 32-bit ID the ZyWALL uses in the OSPF AS.
Default - the highest available IP address assigned to the interfaces is the
ZyWALL's ID.
User Define - enter the ID (in IP address format) in the field that appears when
you select User Define.
Chapter 13 Routing Protocols
Section 10.2.1 on page 184.
Section 13.4.2 on page 242 for
241