Figure 418 Synchronization In Process; Console Port Speed - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Figure 418 Synchronization in Process

The Current Time and Current Date fields will display the appropriate settings if the
synchronization is successful.
If the synchronization was not successful, a log displays in the View Log screen. Try
reconfiguring the Date/Time screen.
To manually set the ZyWALL date and time.
1 Click System > Date/Time.
2 Select Manual under Time and Date Setup.
3 Enter the ZyWALL's time in the New Time field.
4 Enter the ZyWALL's date in the New Date field.
5 Under Time Zone Setup, select your Time Zone from the list.
6 As an option you can select the Enable Daylight Saving check box to adjust the
ZyWALL clock for daylight savings.
7 Click Apply.
To get the ZyWALL date and time from a time server
1 Click System > Date/Time.
2 Select Get from Time Server under Time and Date Setup.
3 Under Time Zone Setup, select your Time Zone from the list.
4 As an option you can select the Enable Daylight Saving check box to adjust the
ZyWALL clock for daylight savings.
5 Under Time and Date Setup, enter a Time Server Address
6 Click Apply.

43.4 Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL
via the console port using a terminal emulation program. See
console port settings.
Click System > Console Speed to open the Console Speed screen.
ZyWALL USG 300 User's Guide
Chapter 43 System
(Table 198 on page
Table 2 on page 55 for default
578).
579