Figure 210 Network > Ipsec Vpn > Concentrator > Edit > Member; Table 98 Vpn > Ipsec Vpn > Concentrator > Edit; Sa Monitor Screen - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 20 IPSec VPN
Each field is described in the following table.
Table 98 VPN > IPSec VPN > Concentrator > Edit
LABEL
Name
#
Member
Add icon
OK
Cancel

20.6 SA Monitor Screen

You can use the SA Monitor screen to display and to manage active IPSec SA. To access this
screen, click VPN > IPSec VPN > SA Monitor. The following screen appears.
320
DESCRIPTION
Enter the name of the concentrator. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
This field is a sequential value, and it is not associated with a specific member in
the concentrator.
This field displays the name of each member in the concentrator.
Note: You must disable policy enforcement in each member. See
Section 20.3.2 on page
Click the Popup icon to change this member in the group.
The following screen appears.
Figure 210 Network > IPSec VPN > Concentrator > Edit > Member
This column provides icons to add members to and remove members from the
concentrator.
To add a member to the concentrator, click the Add icon at the top of the column
to add the new member at the beginning of the list, or click the Add icon next to
an existing member to add the new member after the existing one. The web
configurator chooses a new member alphabetically. You can use the Popup icon
next to the new member to change this.
To remove a member from the concentrator, click on the Remove icon next to the
member. The web configurator confirms that you want to remove the member.
Click OK to save your changes in the ZyWALL.
Click Cancel to exit this screen without saving.
298.
ZyWALL USG 300 User's Guide