Figure 76 Object > Aaa Server > Radius > Default; Figure 77 Object > Auth. Method > Add; Figure 78 System > Www > Authentication; Set Up User Authentication Using The Radius Server - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 6 Tutorials

6.4.3 Set up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for
the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to
use the authentication method. Finally, force users to log in to the ZyWALL before it routes
traffic for them.
1 Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and
click Apply.
Figure 76 Object > AAA Server > RADIUS > Default
2 Click Object > Auth. method. Click the Add icon.
3 Give the new authentication method a descriptive name, and click the Add icon. Select
group radius because the ZyWALL should use the specified RADIUS server for
authentication. Click OK.
Figure 77 Object > Auth. method > Add
4 Click System > WWW. In the Authentication section, select the new authentication
method in the Client Authentication Method field. Click Apply.
Figure 78 System > WWW > Authentication
5 Click Object > User/Group > Setting. In the Force User Authentication Policy
section, click the Add icon.
6 Set up a default policy that forces every user to log in to the ZyWALL before the
ZyWALL routes traffic for them. Select Enable. Then, select force in the
Authentication field. Keep the rest of the default settings, and click OK.
142
ZyWALL USG 300 User's Guide