ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual page 639

Table 225 Maintenance > Report > Traffic (continued)
LABEL
Traffic Type
Refresh
Flush Data
#
IP Address/
User
Direction
Amount
#
Service/Port
Direction
Amount
#
ZyWALL USG 300 User's Guide
DESCRIPTION
Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the most traffic
and how much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and the amount of
traffic for each one.
Web Site Hits - displays the most-visited Web sites and how many times each one
has been visited.
Each type of report has different information in the report (below).
Click this button to update the report display.
Click this button to discard the report data for the selected interface and update the
report display.
These fields are available when the Traffic Type is Host IP Address/User.
This field is the rank of each record. The IP addresses and users are sorted by the
amount of traffic.
This field displays the IP address or user in this record. The maximum number of IP
addresses or users in this report is indicated in
This field indicates whether the IP address or user is sending or receiving traffic.
Choices are Incoming and Outgoing.
Incoming - traffic is coming from the IP address or user to the ZyWALL.
Outgoing - traffic is going from the ZyWALL to the IP address or user.
This field displays how much traffic was sent or received from the indicated IP
address or user. If the Direction is Incoming, a red bar is displayed; if the
Direction is Outgoing, a blue bar is displayed. The unit of measure is bytes,
Kbytes, Mbytes or Gbytes, depending on the amount of traffic for the particular IP
address or user. The count starts over at zero if the number of bytes passes the
byte count limit. See Table 226 on page
These fields are available when the Report Type is Service/Port.
This field is the rank of each record. The protocols and service ports are sorted by
the amount of traffic.
This field displays the protocol or service port in this record. The maximum number
of protocols or service ports in this report is indicated in
This field indicates whether the indicated protocol or service port is sending or
receiving traffic. Choices are Incoming and Outgoing.
Incoming - traffic is coming into the router through the interface
Outgoing - traffic is going out from the router through the interface
This field displays how much traffic was sent or received from the indicated service
/ port. If the Direction is Incoming, a red bar is displayed; if the Direction is
Outgoing, a blue bar is displayed. The unit of measure is bytes, Kbytes, Mbytes,
Gbytes, or Tbytes, depending on the amount of traffic for the particular protocol or
service port. The count starts over at zero if the number of bytes passes the byte
count limit. See Table 226 on page
These fields are available when the Report Type is Web Site Hits.
This field is the rank of each record. The domain names are sorted by the number
of hits.
Chapter 47 Reports
Table 226 on page
640.
Table 226 on page
640.
640.
640.
639