ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual page 69

Table 6 Navigation Panel Summary (continued)
LINK TAB
Routing Policy Route
Static Route
RIP
OSPF
Zone
DDNS
Virtual
Server
HTTP
Redirect
ALG
Firewall
VPN VPN Connection
IPSec VPN VPN Connection
VPN Gateway
Concentrator
SA Monitor
SSL VPN Access Privilege
Connection
Monitor
Global Setting
L2TP VPN L2TP Over IPSec Use this screen to configure L2TP Over IPSec VPN settings.
Session Monitor
AppPatrol General
Common
Instant
Messenger
Peer to Peer
VoIP
Streaming
Other
Statistics
Anti-X
Anti-Virus Summary
Setting
Signature
ZyWALL USG 300 User's Guide
FUNCTION
Use this screen to create and manage routing policies.
Use this screen to create and manage IP static routing information.
Use this screen to configure device-level RIP settings.
Use this screen to configure device-level OSPF settings, including areas and
virtual links.
Use this screen to configure zones used to define various policies.
Use this screen to define and manage domain names and DDNS servers.
Use this screen to set up and manage port forwarding rules.
Use this screen to set up and manage HTTP redirection rules.
Use this screen to configure SIP, H.323, and FTP pass-through settings.
Use this screen to create and manage level-3 traffic rules.
Use this screen to configure IPSec tunnels.
Use this screen to configure IPSec tunnels.
Use this screen to configure IKE tunnels.
Use this screen to configure VPN concentrators (hub-and-spoke VPN).
Use this screen to monitor current IPSec VPN tunnels.
Use this screen to configure SSL VPN access rights for users and groups.
Use this screen to monitor current SSL VPN connection.
Use this screen to configure the ZyWALL's SSL VPN settings that apply to all
connections.
Use this screen to monitor current L2TP Over IPSec VPN sessions.
Use this screen to enable or disable traffic management by application and
see registration and signature information.
Use this screen to manage traffic of the most commonly used web, file
transfer and e-mail protocols.
Use this screen to manage instant messenger traffic.
Use this screen to manage peer-to-peer traffic.
Use this screen to manage VoIP traffic.
Use this screen to manage streaming traffic.
Use this screen to manage other kinds of traffic.
Use this screen to view bandwidth usage and traffic statistics for the protocols
that the ZyWALL is managing.
Use this screen to activate AV scanning on the interface(s), specify actions
when a virus is detected, and view registration and signature information.
Use this screen to configure AV settings like the white and black lists.
Use these screens to search for signatures by signature name or attributes
and configure how the ZyWALL uses them.
Chapter 3 Web Configurator
69