Figure 377 Web Configurator For Non-Admin Users; Table 164 Web Configurator For Non-Admin Users - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 34 User/Group

Figure 377 Web Configurator for Non-Admin Users

The following table describes the labels in this screen.

Table 164 Web Configurator for Non-Admin Users

LABEL
User-defined
lease time (max
... minutes)
Renew
Updating lease
time
automatically
Remaining time
before lease
timeout
Remaining time
before auth.
timeout
514
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one that you
specified. The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of time
remaining before the ZyWALL automatically logs them out. The ZyWALL sets this
amount of time according to the
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see
• Lease time field in the Setting screen (see
This box appears if you checked the Allow renewing lease time automatically
box in the Setting screen. (See
select this check box to reset the lease time automatically 30 seconds before it
expires. Otherwise, access users have to click the Renew button to reset the lease
time.
This field displays the amount of lease time that remains, though the user might be
able to reset it.
This field displays the amount of time that remains before the ZyWALL
automatically logs the access user out, regardless of the lease time.
Section 34.2.1 on page
Section 34.4 on page
Section 34.4 on page 510.) Access users can
ZyWALL USG 300 User's Guide
506)
510)