Figure 190 Firewall Example: Create an Address Object
4 Select Create Object in the Service drop-down list box.
5 The screen for configuring a service object opens. Configure it as follows and click OK.
Figure 191 Firewall Example: Create a Service Object
6 Enter the name of the firewall rule.
7 Make sure Dest_1 is selected for the Destination and MyService is selected as the
Service and that the rest of the screen is configured as follows. Click OK when you are
done.
Figure 192 Firewall Example: Edit a Firewall Rule
8 The firewall rule appears in the firewall rule summary.
ZyWALL USG 300 User's Guide
Chapter 19 Firewall
289