Table 183 Object > Auth. Method > Add; Example: Selecting A Vpn Authentication Method - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

The following table describes the labels in this screen.
Table 183 Object > Auth. Method > Add
LABEL
Name
Method List
Add icon
OK
Cancel

39.3.1 Example: Selecting a VPN Authentication Method

After you set up an authentication method in the Auth. Method screens, you can use it in the
VPN Gateway screen to authenticate VPN users for establishing a VPN connection. Refer to
the chapter on VPN for more information.
Follow the steps below to specify the authentication method for a VPN connection.
1 Access the VPN > IPSec VPN > VPN Gateway > Edit screen.
2 Select Enable Extended Authentication.
3 Select Server Mode and select an authentication method object from the drop-down list
box.
4 Click OK to save the settings.
ZyWALL USG 300 User's Guide
DESCRIPTION
Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the
first character cannot be a number. This value is case-sensitive. For example,
"My_Device".
Select a server object from the drop-down list box. You can create a server object in
the AAA Server screen (see
The ZyWALL authenticates the users using the databases (in the local user
database or the external authentication server) in the order they appear in this
screen.
If two accounts with the same username exist on two authentication servers you
specify, the ZyWALL does not continue the search on the second authentication
server when you enter the username and password that doesn't match the one on
the first authentication server.
Click Add to add a new entry.
Click Edit to edit the settings of an entry.
Click Delete to delete an entry.
Click OK to save the changes.
Click Cancel to discard the changes.
Chapter 39 Authentication Objects
Chapter 38 on page 531 for more information).
543