Figure 37 Vpn Express Wizard: Step 6; Table 17 Vpn Express Wizard: Step 4; Vpn Express Wizard - Summary - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 4 Wizard Setup
Table 17 VPN Express Wizard: Step 4 (continued)
LABEL
Configuration
for Remote
Gateway
Save

4.8.2 VPN Express Wizard - Summary

This summary of VPN tunnel settings is read-only.
Name: Identifies the VPN gateway policy.
Secure Gateway: IP address or domain name of the peer IPSec device.
Pre-Shared Key: VPN tunnel password.
Local Policy: IP address and subnet mask of the computers on the network behind your
ZyWALL that can use the tunnel.
Remote Policy: IP address and subnet mask of the computers on the network behind the peer
IPSec device that can use the tunnel.
You can copy and paste the Configuration for Remote Gateway commands into another
ZLD-based ZyWALL's command line interface.

Figure 37 VPN Express Wizard: Step 6

100
DESCRIPTION
These commands set the matching VPN connection settings for the remote gateway.
If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into
its command line interface in order to configure it for the VPN tunnel.
You can also use a text editor to save these commands as a shell script file with a
".zysh" filename extension. Then you can use the file manager to run the script in
order to configure the VPN connection.
See the commands reference guide for details on the commands displayed in this
list.
Click Save to store the VPN settings on your ZyWALL.
ZyWALL USG 300 User's Guide