Figure 417 System > Date And Time; Table 197 System > Date And Time - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 43 System
43.3 Time and Date
This section shows you how:
1 To manually set the ZyWALL date and time.
2 To get the ZyWALL date and time from a time server.
For effective scheduling and logging, the ZyWALL system time must be accurate. The
ZyWALL's Real Time Chip (RTC) keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server.
To change your ZyWALL's time based on your local time zone and date, click System >
Date/Time. The screen displays as shown.
Figure 417 System > Date and Time
The following table describes the labels in this screen.
Table 197 System > Date and Time
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
576
DESCRIPTION
This field displays the present time of your ZyWALL.
This field displays the present date of your ZyWALL.
ZyWALL USG 300 User's Guide