Figure 372 User/Group > User > Edit; Table 158 User/Group > User > Edit - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Figure 372 User/Group > User > Edit
The following table describes the labels in this screen.
Table 158 User/Group > User > Edit
LABEL
User Name
User Type
Password
Retype
Description
Lease Time
Reauthentication
Time
OK
Cancel
34.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
ZyWALL USG 300 User's Guide
DESCRIPTION
Type the user name for this user account. You may use 1-31 alphanumeric
characters, underscores( _ ), or dashes (-), but the first character cannot be a
number. This value is case-sensitive. User names have to be different than user
group names, and some words are reserved. See
Select what type of user this is. Choices are:
• Admin - this user can look at and change the configuration of the ZyWALL
• Limited-Admin - this user can look at the configuration of the ZyWALL but not
to change it
• User - this user has access to the ZyWALL's services but cannot look at the
configuration
• Guest - this user has access to the ZyWALL's services but cannot look at the
configuration
• Ext-User - this user account is maintained in a remote server, such as RADIUS
or LDAP. See Section 34.1.2 on page 504
Enter the password of this user account. It can consist of 4 - 30 alphanumeric
characters.
This field is not available if you select the Ext-User type. Enter the password again.
Enter the description of each user, if any. You can use up to 60 printable ASCII
characters. Default descriptions are provided.
Enter the number of minutes this user has to renew the current session before the
user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the
number of minutes unlimited. Admin users renew the session every time the main
screen refreshes in the web configurator. Access users can renew the session by
clicking the Renew button on their screen. If you allow access users to renew time
automatically (see Section 34.4 on page
on their screen as well. In this case, the session is automatically renewed before
the lease time expires.
Type the number of minutes this user can be logged into the ZyWALL in one
session before the user has to log in again. You can specify 1 to 1440 minutes. You
can enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user
has no opportunity to renew the session without logging out.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 34 User/Group
Section 34.2.1.1 on page
for more information about this type.
510), the users can select this check box
507.
507