Figure 145 Spillover Algorithm Example; Figure 146 Network > Interface > Trunk; Table 64 Network > Interface > Trunk; Trunk Summary - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 11 Trunks

Figure 145 Spillover Algorithm Example

11.5 Trunk Summary

Click Network > Interface > Trunk to open the Trunk screen. This screen lists the
configured trunks and the load balancing algorithm that each is configured to use.
Figure 146 Network > Interface > Trunk
The following table describes the items in this screen.
Table 64 Network > Interface > Trunk
LABEL
Name
Algorithm
Add icon

11.6 Configuring a Trunk

Click Network > Interface > Trunk and then the Add (or Edit) icon to open the Trunk Edit
screen.
222
DESCRIPTION
This field displays the label that you specified to identify the trunk.
This field displays the load balancing method that the trunk is set to use.
This column lets you create, edit and remove trunks.
To create a trunk, click the Add icon at the top of the column. The Trunk
Members screen appears.
To edit a trunk, click the Edit icon next to it. The Trunk Members screen
appears.
To remove a trunk, click the Remove icon next to it. The ZyWALL confirms you
want to remove it before doing so.
ZyWALL USG 300 User's Guide