Assembling The Analog Simulcast Cable And Panel; Figure B-1 Analog Simulcast Cable And Panel Assembly - Motorola GTR 8000 Manual

GTR 8000 Base Radio
B.2 Assembling the Analog Simulcast Cable and
Panel
Procedure Steps
Use this figure to identify the items used throughout this procedure. See
1
List, page B-1

Figure B-1 Analog Simulcast Cable and Panel Assembly

Insert the cable assembly (item A) through the system connector opening in the panel (item B).
2
The T57 Telco connector may be positioned with the d-shape keying feature either up or down. When
using a right-angle mating connector, verify the orientation needed for proper cable routing before
securing to the panel bracket.
3 Position the strain relief (item C) over the T57 Telco connector.
4 Using the 2 metric M3 screws (item D), fasten the strain relief through the T57 Telco connector and secure it to
the panel using a Tx10 bit driver. Torque to 17 in-lbs.
B-2
for the part numbers of the items called out in this procedure.
B.1 Analog Simulcast Cable Kit Parts
6871022P86-A - November 2012