Installing The Analog Simulcast Cable In An Open Rack Configuration; Figure B-2 Analog Simulcast Cable In An Open Rack Configuration - Motorola GTR 8000 Manual

B.3 Installing the Analog Simulcast Cable in an Open
Rack Configuration
Procedure Steps
Use this figure to identify the items used throughout this procedure. See
1
List, page B-1

Figure B-2 Analog Simulcast Cable in an Open Rack Configuration

2 Secure each extender bracket (item E) to the tapped holes on the rack using two M6 (item F) screws using
a Tx30 bit driver. Torque to 55 in-lbs.
The extender brackets should be mounted one rack unit above or below the GTR 8000 Base Radio.
Installation is dependent on existing devices on the rack.
6871022P86-A - November 2012
for the part numbers of the items called out in this procedure.
B.3 Installing the Analog Simulcast Cable in an Open Rack Configuration
B.1 Analog Simulcast Cable Kit Parts
B-3