Performing An Snmpv3 Connection Verification Using Css - Motorola GTR 8000 Manual

Procedure Steps
In the CSS, log in using the appropriate credentials.
1
Step result: The Configure SNMPv3 Users dialog box appears.
2 To create, delete, or update the selected SNMPv3 user, use one of the following steps:
If...
You want to create a user when the status is Not
Present
You want to update an existing user
You want to remove an existing user
Step result: A Confirmation dialog box appears and asks if you want to continue.
3 Click Yes.
Step result: The Processing Requests dialog box appears and processes the request. A green square indicates
OK and a red square indicates failure.
After reviewing the processing status, click OK.
4
If you encounter any errors, go back to the appropriate step and correct the information entered.
5 Repeat these steps for any SNMPv3 users you wish to create, update, or delete.
6 Click Cancel to exit the Configure SNMPv3 Users dialog box.
Step result: The Configure SNMPv3 Users dialog box closes, and the CSS main window returns.

4.4.5.3.2 Performing an SNMPv3 Connection Verification Using CSS

When and where to use:
Once the SNMPv3 user credentials have been created, modified, or deleted, you can perform a sanity check to ensure
the device is properly configured for SNMPv3. Follow this procedure to verify the SNMPv3 connection.
6871022P86-A - November 2012

4.4.5.3.2 Performing an SNMPv3 Connection Verification Using CSS

Then...
Click Create.
Click Update.
Click Delete.
4-19