Connecting Through A Serial Port Link - Motorola GTR 8000 Manual

GTR 8000 Base Radio
2 Perform the following configuration steps that require an Ethernet connection. See
an Ethernet Port Link, page
a. Set the pairing number of the device. See
b. Set the current date and time in CSS. See
c. Change the SNMPv3 configuration and user credentials from CSS on a selected device in the site. See
4.4.5.3 Changing SNMPv3 Configuration and User Credentials Using CSS, page
d. Create, update, or delete an SNMPv3 user. See
CSS, page
e. Verify the SNMPv3 credentials. See
CSS, page
f. Configure DNS for a conventional base radio using the CSS. See
CSS, page
g. Set the SWDL transfer mode. See
h. Configure for SSH. See Chapter 4, "Configuring SSH for RF Site Devices and VPMs Using CSS" in the
Securing Protocols with SSH manual.
i. Enable RADIUS Authentication using the CSS. See Chapter 7, "Configuring RADIUS Sources and
Parameters Using CSS" in the Authentication Services manual. Make sure that the base radios have been
added to the RADIUS servers on the domain controllers as RADIUS clients.
j. Enable Centralized Authentication using the CSS. See Chapter 7, "Enabling/Disabling Centralized
Authentication Using CSS" in the Authentication Services manual.
k. Set the Local Cache Size for Centralized Authentication using the CSS. See Chapter 7, "Setting the Local
Cache Size for Central Authentication Using CSS" in the Authentication Services manual.
l. Customize the login banner text using CSS (optional). See
CSS, page
m. Enable Centralized Event Logging using the CSS (optional). See Chapter 6, "Enabling/Disabling
Centralized Event Logging on Devices Using CSS" in the Centralized Event Logging manual.
n. Set the NTP Server Settings. See
3 Set up the local Password Configuration using the CSS (optional). See
Configuration Using the CSS, page
4 Continue to one of the following depending on the type of device you are configuring:
• 4.4.6 CSS Configuration Parameters for the GTR 8000 Base Radio (Trunked Simulcast), page 4-26
• 4.4.7 CSS Configuration Parameters for the GTR 8000 Base Radio (Trunked Repeater), page
• 4.4.8 CSS Configuration Parameters for the GTR 8000 Base Radio (HPD), page
• 4.4.9 CSS Configuration Parameters for the GTR 8000 Base Radio (Conventional), page

4.4.2 Connecting Through a Serial Port Link

Prerequisites:
This procedure assumes CSS is loaded on your computer. See the Private Network Management Client manual if
necessary. This procedure describes the steps required to perform a serial connection.
4-4
4-11.
4-18.
4-19.
4-21.
4.4.5.6 Setting the SWDL Transfer Mode Using CSS, page
4-22.
4.4.5.7 Setting the NTP Server Settings, page
4-25.
4.4.5.1 Setting the BR/CM Pairing Number Using CSS, page
4.4.5.2 Setting the Date and Time Using CSS, page
4.4.5.3.1 Adding or Modifying an SNMPv3 User Using
4.4.5.3.2 Performing an SNMPv3 Connection Verification Using
4.4.5.5 Customizing the Login Banner Using
4.4.4 Connecting Through
4-15.
4.4.5.4.1 How to Configure DNS Using
4-24.
4.4.5.8 Setting Up the Local Password
4-28.
6871022P86-A - November 2012
4-14.
4-15.
4-23.
4-27.
4-30.