Motorola GTR 8000 Manual page 148

GTR 8000 Base Radio
Normally the computer is connected to the appropriate LAN switch either locally or remotely
through the network. Do not connect directly to a device unless downloading the software
individually to that device.
b. Start the computer.
Open the CSS application.
2
3 Select Tools → Connection Configuration from the menu.
Step result: The Connection Screen appears.
Verify that Ethernet is selected in the Connection Type area.
4
5 If connected through the LAN switch, specify the IP address for the device in the Ethernet Settings area.
Do the following:
If...
Know the IP address for the device.
Trunked Device: Do not know the IP address, but
know the system identification of the device (the
zone, site, subsite, and device ID of the device).
Conventional Device: Do not know the IP address.
4-12
Then...
1. Enter the IP address for the device in the
Device IP Address field.
2. Continue with step 6.
1. Click Fetch DNS Entry to open the DNS IP
Address Calculation Screen dialog box.
2. Select the desired device type from the Device
list box.
3. Enter the proper values in the Zone, Site,
Subsite, and Device ID fields.
Some fields, such as Subsite, do
not allow entries for some devices.
Therefore, select the device first.
4. Click OK.
Step result: The DNS information of the
device automatically appears in the Device IP
Address field.
5. Continue with step 6.
1. Establish a serial connection to the device. See
4.4.2 Connecting Through a Serial Port Link,
page 4-4.
2. For a base radio or comparator, select Tools →
Set IP Address/BR_CM Pairing Number.
6871022P86-A - November 2012