Figure 9-10 Fan Cable Connector - Motorola GTR 8000 Manual

GTR 8000 Base Radio
17 Reinstall the metal bulkhead that holds the RF output cable from the power amplifier, using the two screws
previously removed to secure it to the inner chassis at the left of the backplane.
18 Connect the fan cable to the new backplane, from the front of the chassis, with the backplane secured to
the chassis, as follows:
a. Locate the port in the new backplane for the fan cables multi-pin connector.
b. Follow the fan cable with your hand from its connector at the front of the chassis to the connector at the
other end of the cable.
c. Push the fan cables multi-pin connector, with the tab up, into the correct location in the backplane.

Figure 9-10 Fan Cable Connector

9-24 6871022P86-A - November 2012