Figure 4-2 CSS Login Banner
4.4 Configuring a Device Using CSS
This section covers configuration of a device using the Configuration/Service Software (CSS).
If you do not know the IP address for the device, it is available through a serial port connection in the Tools
→ Set IP Address from the CSS menu.
4.4.1 Initial Configuration of a Device Using CSS
Process Steps
Perform the following configuration steps that require a serial connection. See
1
Serial Port Link, page
a. Set the IP address and paring number of the device. See
Number Using CSS, page
b. Set the serial security services. See
6871022P86-A - November 2012
4-4.
4-7.
4.4.3.3.1 Setting the Serial Security Services Using CSS, page
4.4 Configuring a Device Using CSS
4.4.2 Connecting Through a
4.4.3.1 Setting the Device IP Address and Pairing
4-9.
4-3