GTR 8000 Base Radio
3.3.12 General Installation/Troubleshooting Tools
If information is needed regarding where to obtain any of the equipment and tools listed, contact the Motorola
System Support Center (SSC). See
3.3.12.1 General Tools
The following is a list of general tools needed to install, optimize, and service equipment in the system:
• 150 MHz 4 Channel Digital Storage Oscilloscope
• Transmission Test Set (TIMS Set)
• Aeroflex 3900 Series Service Monitor
• 50 Ohm Terminated Load
• Digital Multimeter (DMM)
• Terminal Emulation Software
• DB-9 Straight through serial cable
• RS-232 Cables with Connectors
• Punch Block Impact Tool
• MODAPT — RJ-45 Breakout Box
• Remote RJ-11/ RJ-45 Cable Tester (1200 ft. length maximum)
• PC Cable Tester (RG-58, 59, 62, BNC, RJ-45, RJ-11, DB-9, DB-15, DB-25, Centronics 36-pin connectors
• ESD field service kit
• Amprobe Instruments GP-1 Earth Tester
• AEMC 3730 Clamp-on Ground Resistance Tester
3.3.12.2 Rack Tools
The following is a list of tools needed to install, optimize and service the equipment:
• Service Monitor: Aeroflex 3900 Series Service Monitor with P25 Options installed (plus HPD & TDMA
options as required)
• Personal Computer meeting the following specifications:
– Operating Systems:
3-14
8.5 Using Motorola System Support Center (SSC), page
®
♦ Windows
XP Home Edition
♦ Windows XP Professional
♦ Windows Vista
®
(all editions)
8-8.
6871022P86-A - November 2012